Janisol SG windows (project solution)

A logical development for contemporary steel-glass architecture.

The glass unit is bonded to a welded steel frame. This obviates the need for internal glazing beads and from outside, only the enamelled edge of the glass is visible. As a result, and thanks to the uniform glass level, the vent and frame appear extraordinarily streamlined and elegant. This project solution allows glass thicknesses of 24 – 26 mm to be used. The glazing composition and the joint sizes must be agreed with the glass supplier and the installer on a caseby- case basis. If necessary, our consultants will be glad to help you turn your project-specific solution into reality. The standard fittings from the Janisol range can be used to fabricate side-hung, turn/tilt and bottom-hung vents.