Industrial sliding doors
Jansen steel profiles create large-area and torsion-resistant door systems with slender frames. The ranges of profiles and seals are suitable for manual and automatic doors. The Jansen folding and sliding door system is compliant with the CE marking requirements and fulfils the requirements of product standard EN 13241-1.
|
Materials / surface finishes
|
- Uncoated steel or hot-dip galvanised steel strip, suitable for powder-coating or stove-enamelling
|
|
Element types
|
- Manual and automatic folding doors
- Automatic sliding folding doors
- Manual and automatic sliding doors
- Free leaf configuration
- Folding door inward- or outward-opening
- Fully or partially sheet metal clad
|
|
Equipment
|
- Automatic drive
- Service doors
- Anti-fingertrap door versions
- With double-glazed or panel filling
- With integrated espagnolette bolt
|
|
Special technical features
|
- Installation depths 50, 60 and 80 mm
- Sliding doors with upper or lower track
- Installation behind, in or in front of the reveal
|
|
Test certificate folding doors
|
- CE marking in accordance with product standard EN 13241-1
- Tightness against heavy rain class 3
- Air permeability class 4
- Resistance to wind load class 5
- Operating forces and user safety in accordance with EN 12453
|
|
Test certificates sliding doors
|
- CE marking in accordance with product standard EN 13241-1
- Tightness against heavy rain class 3
- Air permeability class 1
- Resistance to wind load class 4
- Operating forces and user safety in accordance with EN 12453
|
